Beer Hydrometer

By Tony  



beer hydrometer

Home Beer Making – How To Brew A Higher Alcohol Content Beer At Home

Beer production has evolved enormously over the past decades. From ancient home beer making traditions, down to the most technological methods used by brewing moguls in Europe and in the United States, brewing has definitely gone through a wide range of alterations and advancements. But with all the changes instigated by both master home brewers and brewery magnates, one inherent process remains the same – fermentation.

 

From a more scientific perspective, fermentation in the beer making process happens when the yeast content of the cereal grains converts glucose into alcohol and carbon dioxide. While most beers would have an alcohol content of four to six percent by volume, home brewers can always opt for stronger snifters. Brewing a flavorful beer with higher alcohol content can be achieved by considering a malt base with higher gravity, increasing the fermentation phase, and using yeasts that are more attenuative in character.

The Base and the Basics

Increasing the proportions of your malt base and your water content will equate to increased gravity levels. As a general rule, the higher the specific gravity, the higher the alcohol content. Pick rich grains and add the malt extracts prior to fermentation. A hydrometer may be used to measure the specific gravity of your home made concoction. Reaching figures that are roughly around 1.07 to 1.08 are already ideal results. Denser wort equates to more sugars available for fermenting.

The Fermentation Process

The lag phase in fermentation where the wort begins to assimilate to the new characteristics of its environment can last from one hour to several days. In this case, a little waiting will do your beer a lot of good. Remember that at this phase, the yeast is working extra hard to respirate the added amount of sugar in the form of richer grains; so give it time to finish all the chemical phases that it needs to undergo. Typical fermentation periods usually yield 35 grams of ethanol per liter of beer. Allowing longer fermentation will help increase the alcohol levels. Beers with alcohol contents of up to 12 percent or more by volume can take as much as 4 to 6 months to ferment.

The Yeast Factor

On a general note, attenuative yeast selections usually continue to ferment to increased alcohol levels. Attenuation is the ability to transform sugar into alcohol. The brewers’ yeast, scientifically known as Saccharomyces cervisiae, is just one of the roughly 500 yeast species known to man. This yeast specie is preferred by beer brewers because these specific strains are characterized by ideal attenuation, alcohol tolerance, flocculation (innate ability to bundle together), and zesty fermentation flavors.

Yeasts also affect the taste profile of beer.

 

In fact, the flavor wheel release by The American Society of Brewing Chemists evidently shows that 79% of the total taste or flavor of beers are attributed to actual yeast derivatives (by-products), or beer elements that are directly or indirectly affected by yeast. The way they absorb the iso-alpha-acids directly affects the bitterness of beer because these alpha compounds are actually responsible for the pungent taste that strong beers are known for. However, master brewers always emphasize that great brewers should know how to strengthen their beers without compromising the flavor. If you really want beers with high strength alcohol, opt for yeasts that can stand alcohol concentrations like the Wyeast1056.

These strains are known to put up with alcohol concentrations of up to 10 percent.

Regardless of the strength, be sure that your home made beer will not offset overall quality. While attempting to draft strong beers with a distinct, strong kick, be sure that you still consider what home beer making is really all about – the art of crafting your very own beverage to achieve optimum satisfaction and unparalleled quality that only hand crafted beers can offer. After all, more than the entire scientific process, home brewed beer is genuinely a dexterous art.

 

About the Author

Ever wanted to know how to easily brew your own amazing beer at home?

Pay attention because this cutting-edge beer brewing guide will get you up and running home beer making in no time. This beer brewing method is idiot proof with step-by-step instructions along with pictorials to guide you every step of the way!

 

Learn more about becoming the envy of every single beer making “wannabe” at http://MyHomeBeerMaking.com.

Hydrometer – Brewing Beginner Series


- 	 Hydrometer Test Jar for Home Brewing or Wine Making 12 Inches Tall


- Hydrometer Test Jar for Home Brewing or Wine Making 12 Inches Tall


$2.30


The Economy Test Jar has a wide plastic base to prevent tipping, and is 14 1/4″ tall….

Sainstore Refractometer for Measuring Sugar Content for Beer or Wine


Sainstore Refractometer for Measuring Sugar Content for Beer or Wine


$31.44


This refractometer from Learn To Brew is for measuring the sugar content of beer and includes an automatic temperature compensation of 10 – 30 degree Celsius. No tools are needed for calibration. This refractomerter can replace your homebrew hydrometer and is much more precise. It is ideal for brewing and is extremely easy to use. Just drop some wort or beer on the lense and gaze through the eye p…

Beer Wort and Wine Refractometer, Dual Scale - Specific Gravity and Brix, replaces homebrew hydrometer


Beer Wort and Wine Refractometer, Dual Scale – Specific Gravity and Brix, replaces homebrew hydrometer


$49.99


This refractometer is for measuring the sugar content of beer and includes an automatic temperature compensation of 10 – 30 degree Celsius. This refractometer can replace your hydrometer for easier and more accurate measurements. Simply use the dropper to take a sample of wort and put it on the prism. Then hold the refractometer up to the light and look through the eyepiece. Due to the dual scale …

Hydrometer - Triple Scale


Hydrometer – Triple Scale


$1.11


Triple Scale Hydrometer…

The Hydrometer Code


The Hydrometer Code


$9.99


Son of a brewer in 18th century England, John Beavershaft aims to be a leader in brewing science by pioneering the use of the new instrument, the hydrometer. He is led into a marriage with a former actress placed by a pair of schemers who aim to take control of his father’s brewery. At the same time he is busy using their capital to expand the brewery, using his own ideas and plans for novel equip…

The Beer Lover's Guide to Beer Books: A Bibliography of Brewers, Brewing, Pubs, and Other Beer Related Subjects, Published in Books and Pamphlets and Printed in English Over the Last 550 Years or So.


The Beer Lover’s Guide to Beer Books: A Bibliography of Brewers, Brewing, Pubs, and Other Beer Related Subjects, Published in Books and Pamphlets and Printed in English Over the Last 550 Years or So.


$14.95


A brand new reference for reading about beer, its history, its ingredients,what the different styles are, how and why it tastes the way it does, how it is made, where it is made, the brewers who have made ot, even how to make it yourself, and how and where it can be enjoyed….

Philatelic Side Lines: Hydrometer Labels, Lock Seals, Beer Stamps, Cigarette Stamps, Customs Cigarettes, Small Cigar Stamps, Small Snuff Stamps, ... Of The French Post Office, French Colonial...


Philatelic Side Lines: Hydrometer Labels, Lock Seals, Beer Stamps, Cigarette Stamps, Customs Cigarettes, Small Cigar Stamps, Small Snuff Stamps, … Of The French Post Office, French Colonial…


$10.62


This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the…



Post a Comment

Your email is never shared. Required fields are marked *

*
*